EXP Computer C4077-90960 User Manual download pdf (Page 223)

100

101

Motor, Transport Belt and Encoder Assembly

1 Remove the left cover (see Figure 6-65).

2 Remove all paper bins and the blind cover (see Figure 6-86).

3 Remove the Controller PCA (see Figure 6-87).

4 Remove (2) screws, CH112, from the motor assembly (Figure 6-83, callout 1).

5 Remove the small drive belt (Figure 6-84, callout 2) from the motor drive

gear.

6 Pull the motor and Encoder Assembly clear of the frame while guiding the

cables through the access hole in the bottom of the frame.

To Reinstall:

1 Make sure that the segmented disk at the back of the Transport Belt Motor

is approximately centered in the Encoder Assembly photosensor

(Figure 6-85, callout 3).

2 Replace the drive belt on the motor drive gear before installing and

tightening the screws.

Multi-Bin Mailbox/Mailbox with Stapler, Transport Belt Motor Screws

Figure 6-83

6-96 Removal and Replacement

1 2 ... 218 219 220 221 222 223 224 225 226 227 228 ... 407 408

Comments to this Manuals

No comments

EXP Computer C4077-90960 User Manual Page 223

Comments to this Manuals